Wacker Neuson SM100 Mini Loader: Specs, Attachments, and What It’s Actually For

10/26/2026
A Wacker Neuson SM100 on a construction site.

That’s the short version. The longer one? Let’s take a look at the specs that matter, the attachments it runs, and the jobs it handles well alongside the ones it does not.

SM100 Specs at a Glance

What the Price Actually Buys You

Width is a huge benefit of this class of machine, and at 35.5 inches, the SM100 clears a standard 36-inch gate. It fits down a vineyard row, through a barn door, and also between the posts of a shade structure.

The 3,300-pound weight matters just as much, since you can haul an SM100 on a standard tandem-axle trailer behind a three-quarter-ton pickup. That means you don’t have to rent a lowboy, have a CDL, or schedule a hauler for a half-day job.

What the SM100 Will Lift

The 85.7-inch hinge pin height is the other number worth knowing, because it means the SM100 dumps over the side of a high-sided truck or into a standard roll-off dumpster. Plenty of mini loaders in this weight class cannot do the same.

Attachments the SM100 runs

The SM100 uses the common industry attachment interface, so a wide selection of mini skid steer attachments on the market bolt straight on, whether they're made by Premier, Danuser, or another manufacturer.

The 13 gpm standard auxiliary circuit at 3,045 psi is what drives them. That flow rate covers the attachment categories most operators need:

Ask your Belkorp Ag rep which attachments are stocked locally and which have to be ordered. Attachment availability varies by store and by season.

What the SM100 is actually for

The SM100 no doubt earns its keep in California ag, but here are a few areas where it excels.

Orchards and vineyards. Row spacing is nearly impossible for full-size equipment to fit between. The SM100 fits between rows, runs an auger for replants, and hauls prunings out with a grapple. Low ground pressure from the 11-inch tracks means less compaction in wet spring soil.

Dairy and livestock. The machine fits down a feed alley and through a barn door. It scrapes, loads bedding, moves feed, and cleans pens. Standing on the platform instead of sitting in a cab means the operator steps off and back on constantly, which makes work flow smoothly.

Nurseries and greenhouses. Similar to the unique working conditions of orchards and livestock farms, nurseries and greenhouses have tight aisles, soft floors, and low doorways, making the SM100 perfect for small spaces here as well.

Property and small construction work. The SM100 also does well with landscape install, irrigation trenching, fence lines, backfill, and site cleanup in yards too small for a compact track loader.

The common theme here is access. If the job is limited by where the machine can physically go rather than by how much it can move per hour, the SM100 is the right tool.

What it is not for

The SM100 is not a production earthmoving machine. If you are moving yards of dirt all day, a compact track loader with two to three times the capacity will finish the job faster and cost less per yard.

It is not a high-flow machine either, so at 13 gpm it will not run large mulchers, cold planers, or high-flow forestry heads.

It is not a road machine, and while 5.2 mph is quick for its class, you will still need to trailer it between job sites.

And it is a stand-on platform, not a cab. On a long day in July heat or January fog, that matters. Operators who spend eight hours straight in a machine typically prefer a cab.

SM60, SM100, or SM120

Wacker Neuson builds two more sizes of utility track loaders in addition to the SM100, and the differences between them come down to weight and capacity.

The SM60 is the lightest and easiest to move around, while the SM120 lifts the most. The SM100 sits in the middle, which is why it is the most common pick. Talk through your row spacing, your door widths, and your heaviest regular load before you choose the mini track loader for your next job.

See the SM100 at Belkorp Ag

Belkorp Ag carries the Wacker Neuson SM100 across eight California locations, from Firebaugh and Merced through Modesto, Crows Landing, and Stockton, up to Santa Clara, Santa Rosa, and Ukiah.

Specs tell you part of the story. Standing on the platform and running it down your own row tells you the rest. Contact your nearest Belkorp Ag location to see the SM100, talk attachments, or set up a demo.

Frequently Asked Questions

How wide is the Wacker Neuson SM100?

35.5 inches overall. It clears a standard 36-inch gate and fits most vineyard and orchard row spacings.

How much can the SM100 lift?

1,000 pounds rated operating capacity, calculated at 35% of its 2,857-pound tipping load.

What engine is in the SM100?

A 24.7 hp Yanmar 3TNV80FT. It is a water-cooled, turbocharged, three-cylinder Tier 4 Final diesel.

Will the SM100 run attachments from other brands?

Yes. It uses the common industry mini loader attachment interface, so most mini skid steer attachments fit.

Can I tow the SM100 with a pickup?

At 3,300 pounds, it trailers behind a properly equipped three-quarter-ton truck. Add attachment and trailer weight before you decide.