1025R Sub-Compact Utility Tractor

<< Go back to 1 Family Sub-Compact Utility Tractors

John Deere 1025R Sub-Compact Utility Tractor

John Deere 1025R Sub-Compact Utility Tractor
  • Powerful Tier 4-compliant diesel engine
  • New, easy-lift hood with dual gas-charged lift struts
  • Premium Operator Station with ergonomic seat, armrests and fender lights
  • Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes

Engine

Family EYDXL1.27NS1
FYDXL1.27NS1
GYDXL1.27NS1
Manufacturer Yanmar
Engine model 3TNV80F-NCJT
Engine power (gross) 17.8 kW
23.9 hp
24.2 PS
SAE J1995 rated power
Power take-off (PTO) power 13.4 kW
18 hp
Rated engine speed 3200 rpm
Type Diesel
Injection pump type Indirect Injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.267 L
3 / 77.3 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 80x84 mm
3.15x3.31 in.
Compression ratio 23.0:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element with mechanical restriction indicator
Engine torque at rated speed 55.2 Nm
40.7 lb-ft
Fuel tank capacity 21.2 L
5.6 U.S. gal.

Electrical

Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp

Fuel system

Type Indirect Injection
Fuel consumption 5.8 L/hr
1.5 U.S. gal./hr

Transmission

Standard transmission; forward/reverse Hydrostatic - 2 range
Optional transmission; forward/reverse
Left-hand reverser No
Transmission gear ranges
Final drive Bull Gear
Brakes Wet disc (left-hand pedal)
Steering Power
Clutch, wet/dry N/A
Clutch disk diameter wet clutch
Axle capacity Front
612 kg
1349 lbRear
715 kg
1576 lb
Creeper No
Cruise control Standard
Differential lock Yes
Drawbar maximum vertical load

Hydraulics

Type Open center
Pump rated output Steering
10.8 L/min
2.8 gpmImplement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Pump type Gear
Maximum operating pressure 137.9 bar
2000 psi
Draft control sensing Position control
Remote control valves available Two

3-point hitch

Category Limited Category 1
Lift capacity, 24-in. behind link arms 309 kg
681 lb

Power take-off (PTO)

Standard Rear - 540 rpm
Mid - 2100 rpm
Optional
Control Independent
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc
Engagement method

Fluid capacities

Crankcase with filter 2.7 L
2.9 qt
Transmission and hydraulic system 3.7 gal.
14 L

Final drive

Type Bull Gear
Differential lock Yes

Operator station

Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle One-piece semi flat
Gear shift location - console/floor Left-hand side

Cab

Compliance NA
Visibility NA
Air conditioning, temperature differential NA
Doors NA
Noise rating NA
Seat equipment NA

Dimensions

Wheelbase 145 cm
57.1 in.
Front axle clearance 195 mm
7.7 in.
Turning radius with brakes
Turning radius without brakes 2.25 m
7.4 ft
Limited slip differential No
Approximate shipping weight (open-station; cab) 655 kg
1444 lb

Tires

Front R4 - 18x8.5-10
Rear R4 - 26x12-12
Front tread range 91.8 cm
36.1 in.
Rear tread spacing

Miscellaneous

Toolbox Yes
Tilt steering wheel
12-V Outlet

Additional information

Date collected



Request more info  View deere.com Page  Build Your Own

* Required








scroll up